MagneMotion MagneMover LITE, Руководство пользователя, Страница: 286 / 382

Maintenance
Preventive Maintenance
2 MagneMotion
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Preventive Maintenance
The motors, Node Controllers, and power supplies that make up the MagneMover LITE trans-
port system are self contained components designed for use in a clean, inert environment and
require no maintenance other than that described here. Any deviation from this basic environ-
ment may affect the maintenance requirements, contact MagneMotion Technical Support for
additional information. Refer to
Troubleshooting on page 7-13 if any problems are detected.
Table 7-1: MagneMover LITE Preventive Maintenance Schedule
Component Maintenance Action Frequency
*
* The specified frequency is based on a certified clean, inert environment. The user should adjust their Preven-
tative Maintenance Schedule to account for any deviations from this environment.
Page #
MagneMover LITE
Transport System General Cleaning 3 months or
as required 7-3
Spray Cleaning 3 months or
as required 7-3
Puck Cleaning 3 months or
as required 7-4
Puck Wear Surface Maintenance 3 months or
as required 7-5
Cable Connection Inspection 3 months or
as required 7-5
Hardware Inspection 3 months or
as required 7-5
Cleaning Magnet Arrays 3 months or
as required 7-5
Node Controllers Transfer Log Files 3 months or
as required 7-6
Power Supplies Clean Power Supply Air Filter 12 months or
as required 7-6
Precision Rail Option Lubricating the Precision Rails As required 7-7
Refilling a Precision Rail Vehi-
cle’s Lubricating Applicator As required 7-8
Adjusting Vehicle Bearings As required 7-11