MagneMotion MagneMover LITE, Руководство пользователя, Страница: 318 / 382

Maintenance
Repair
34 MagneMotion
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Separating Magnet Arrays
Magnet arrays can become stuck to each other or to any ferrous materials through improper
handling. It is the responsibility of the user to define and implement their own separation pro-
cedures. Note that it may be impossible to separate very large magnet arrays.
• Magnet arrays that become stuck to each other should only be separated by trained
personnel. MagneMotion recommends returning stuck magnet arrays to MagneMotion
for separation.
• Magnet arrays stuck to a surface can be removed by sliding the array to the edge of the
surface it is stuck to. Then moving the array so it is only in minimal contact with the
edge and then lifting the array away from the edge starting at one end of the array.
CAUTION
Strong Magnets
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
array on the vehicles (pucks).
To avoid injury from strong magnetic attractive forces:
•
Handle only one vehicle (puck) or magnet array at a time.
• Do not place any body parts, such as fingers, between a
vehicle (puck) or magnet array and any ferrous material
or another magnet array.
• Vehicles (pucks) or magnet arrays not being used should
be secured individually in isolated packaging.
To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (memory disks/chips, credit cards, and tapes) and elec-
tronics away from the magnet arrays.