Lantronix EMG 8500 страница 197 Скачать руководство пользователя

Страница: 197 / 416

10: Remote Power Managers

EMG™ Edge Management Gateway User Guide

197

Model

Select the Model in the drop-down menu. The drop-down menu will be

populated with models supported for the selected vendor. To the left of each

model name is one or two letters in parentheses that indicate the type of

control available for the selected model: P - SNMP, S - serial port, U - USB

port, N - network. Some of the model names in the list may be truncated

because the list of models is very long - in this case, hover over the model

name and the complete model name(s) will be displayed.

Managed via

If there is more than one way to manage the selected model, select the

appropriate management method.

USB Device

For USB controlled devices, if the RPM is connected to a USB port, the device

should be displayed in the USB Device dropdown. Select the correct device.

This will automatically fill in the

Port

with the correct port number and the

Driver Opts

with the USB vendor and product ID (see below).

Name

Specify the unique name of the RPM (up to 20 characters).

# of Outlets

Specify the number of outlets on the RPM (maximum of 120 outlets).

IP Address

For SNMP and Network (Telnet) managed RPMs, specify the IP address of

the RPM.

Port

For network (Telnet) managed RPMs, this is assumed to be port 23 (if left

blank), or it can be filled in with an alternate TCP port. For USB managed

RPMs, this is the front USB port ("0") or the device port that the RPM is

connected to on the EMG (this may be automatically filled in when the

USB

Device

is selected). For serially controlled RPMs, this is the device port that

the RPM is connected to on the EMG.

Driver Opts

For the driver associated with the RPM device, these are extra options which

may be required to make the driver work. The most frequent use of the driver

options is for USB devices (the vendor and product ID may be required so that

the EMG can find the correct device on the USB bus), or in the event that the

default driver options do not work with the RPM. The vendor and product ID

may be automatically filled in if a USB Device is selected. There may also be

other driver options that are filled in by the EMG from an internal table - these

will be automatically set and can be viewed after the RPM has been added,

and can always be overridden by driver options set by the user. For a

complete list of RPM models, drivers and driver options, refer to the

Network

UPS Tools Hardware Compatibility List

. The format of the driver options

setting is one or more comma-separated parameters-value pairs, e.g.

Login

For Network and serially managed RPMs, this is the administrator login.

Password/Retype

Password

For Network and serially managed RPMs, this is the administrator password.

Read Community

For SNMP managed RPMs, this is the SNMP read (get) community.

Write Community/Retype

Write Comm

For SNMP managed RPMs, this is the SNMP write (set) community.

Log Status

Indicates if the status of the RPM is periodically logged and the interval in

minutes. Select

Yes

and enter a value between 1 and 60 minutes. The logs

can be viewed by viewing the

Devices > RPMs

page and clicking on "Logs".

Critical SNMP Traps

If enabled, under critical conditions (UPS goes onto battery power, UPS

battery is low, UPS forced shutdown in progress, UPS on line power, UPS

battery needs to be replaced, RPM is unavailable, communications with RPM

lost, communications with RPM established), a

EMGEventRPMAction

trap will be sent to the NMS configured in the

SNMP

settings. This requires

that SNMP traps be enabled.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды