Lantronix EMG 8500 Скачать руководство пользователя страница 162

Страница: 162 / 416

9: Device Ports

EMG™ Edge Management Gateway User Guide

162

Modem Settings: PPP Mode

3. To save settings for just this port, click the

Apply

button.

4. To save selected settings to ports other than the one you are configuring:

Negotiate IP Address

If the EMG unit and/or the serial device have dynamic IP addresses (e.g., IP

addresses assigned by a DHCP server), select

Yes

is the default.

If the EMG or the modem have fixed IP addresses, select

, and enter the

Local IP

(IP address of the port) and

Remote IP

(IP address of the modem).

Authentication

Enables

PAP

CHAP

authentication for modem logins.

PAP

is the default.

With PAP, users are authenticated by means of the Local Users and any of the

remote authentication methods that are enabled. With CHAP, the CHAP

Handshake fields authenticate the user.

CHAP Handshake

The

Host/User Name

(for UNIX systems) or

Secret/User Password

(for

Windows systems) used for CHAP authentication. May have up to 128

characters.

CHAP Auth Uses

For CHAP authentication, determines what is used to validate the

CHAP

host/

user sent by the remote peer: either the CHAP Host defined for the modem, or

any of the users in the

Local Users

list.

Same authentication for

Dial-in & Dial-on-Demand

(DOD)

Select this option to let incoming connections (dial-in) use the same

authentication settings as outgoing connections (dial-on-demand). If this option

is not selected, then the dial-on-demand connections take their authentication

settings from the DOD parameter settings. If

DOD Authentication

PAP

then the

DOD CHAP Handshake

field is not used.

DOD Authentication

Enables

PAP

CHAP

authentication for dial-in & dial-on-demand.

PAP

is the

default. With PAP, users are authenticated by means of the Local Users and

any of the remote authentication methods that are enabled. With

CHAP

, the

DOD CHAP Handshake

fields authenticate the user.

DOD CHAP Handshake

For

DOD Authentication

, enter the

Host/User Name

for UNIX systems) or

Secret/User Password

(for Windows systems) used for CHAP authentication.

May have up to 128 characters.

Enable NAT

Select to enable Network Address Translation (NAT) for dial-in and dial-out

PPP connections on a per modem (device port or USB port) basis. Users

dialing into the EMG access the network connected to Eth1 and/or Eth2.

Note:

IP forwarding must be enabled on the

Network > Network Settings (1 of

page for NAT to work. See

Chapter 6: Networking on page 66

Dial-out Number

Phone number for dialing out to a remote system or serial device. May have up

to 20 characters. Any format is acceptable.

Remote/Dial-out Login

User ID for dialing out to a remote system. May have up to 32 characters.

Remote/Dial-out

Password

Password for dialing out to a remote system. May have up to 64 characters.

Retype

Re-enter remote/dial-out password for dialing out to a remote system. May

have up to 64 characters.

Restart Delay

The number of seconds after the timeout and before the EMG unit attempts

another connection. The default is

seconds.

CBCP Server Allow

No Callback

For CBCP Server state, allows "No Callback" as an option in the CBCP

handshake in addition to User-defined Number and Admin-defined Number.

CBCP Client Type

For CBCP Client, this selects the number that the client would like to use for

callback - either a user-defined number passed to the server (specified by the

Fixed Dial-back Number) or an administrator-defined number determined by

the server based on the login that is PAP or CHAP authenticated.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды