Lantronix EMG 8500 Скачать руководство пользователя

Страница: 80 / 416

6: Networking

EMG™ Edge Management Gateway User Guide

3. From the

Interface

drop-down list, select the desired network interface and click the

Map

Ruleset

button. The Interface and rule set display in the IP Filter Mappings table.

To delete a mapping:

1. Click the

Network

tab and select the

IP Filter

option. The

Network > IP Filter

page displays.

2. Select the mapping from the list and click the

Delete Mappings

button. The mapping no

longer displays.

3. Click the

Apply

button.

Enabling IP Filters

On the

Network > IP Filter

page, you can enable all filters or disable all filters.

Note:

There is no way to enable or disable individual filters.

To enable IP filters:

1. Enter the following:

Enable IP Filter

Select the

Enable IP Filter

checkbox to enable all filters, or clear the checkbox

to disable all filters. Disabled by default.

Packets Dropped

Displays the number of data packets that the filter ignored (did not respond to).

View only.

Packets Rejected

Displays the number of data packets that the filter sent a “rejected” response to.

View only.

Test Timer

Timer for testing IP Filter rulesets. Select No to disable the timer. Select Yes,

minutes (1-120) to enable the timer and enter the number of minutes the timer

should run. The timer automatically disables the IP Filters when the time

expires.

Time Remaining

Indicates how many minutes are left on the timer before it expires and IP Filters

disabled. View only.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды