Lantronix EMG 8500 страница 304 Скачать руководство пользователя

Страница: 304 / 416

14: Maintenance

EMG™ Edge Management Gateway User Guide

304

3. You have the following options:

To add the defined event, click the

Add Event

button. The event displays in the Events

table at the bottom of the page.

To edit an event, select the event from the Events table and click the

Edit Event

button.

The

Maintenance > Events

page displays the event.

To delete an event, select the event from the Events table and click the

Delete Event

button. A message asks for confirmation. Click

4. To save, click

Apply

Outlet

When the trigger is set to

RPM Load over Threshold

, select the outlet that will be

monitored for a current that exceeds a defined threshold. The RPM needs to

support providing a current level for the selected outlet as part of its status

information. If an outlet is not specified, the current level for the entire device will be

monitored. The RPM current will be checked every 2 minutes.

Threshold

When the trigger is set to

RPM Load over Threshold

, specify the maximum

allowable threshold for the current; any current readings over this threshold will

trigger the selected action. The threshold can be specified in Amps (e.g. 8.5) or as

a percentage (e.g. 90%).

DIO Port

When the trigger is set to

DIO Port State Change

DIO Port State Abnormal

select the DIO port to monitor. For state change, the selected action will be

triggered if the state changes from On to Off or from Off to On. For state abnormal,

the selected action will be triggered if the state changes from the

Normal

state to

the opposite state (see

DIO Port on page 175

for more information).

Action

From the drop-down list, select the action taken because of the trigger. For

example, the action can be writing an entry into the syslog with details of the event

or sending the trap(s) to the Ethernet or modem connection.



Syslog



Forward All Traps to Ethernet



Forward Selected Trap to Ethernet



Forward all Traps to a Modem Connection



Forward Selected Trap to a Modem Connection



Email Alert



SNMP Trap



Turn DIO Relay On

Ethernet

For actions that require an Ethernet connection (for example,

Forward All Traps to

Ethernet

), select the Ethernet port to use.

Modem Connection

For actions that require a modem connection (for example,

Forward All Traps to a

Modem Connection

, select which modem connection to use (

Device Port

USB

Port U1

, or the

Internal Modem

NMS/Host to forward

trap to

For actions that forward a trap, enter the IP address of the computer to forward the

trap to. The computer does not have to be an SNMP NMS; it just has to be capable

of receiving SNMP traps.

SNMP Community

Forwarded traps are sent with this SNMP community value
There is no default.

SNMP Trap OID

Enter a unique identifier for an SNMP object. (An SNMP object is anything that can

hold a value and can be read using an SNMP "get" action.) The OID consists of a

string of numbers separated by periods (for example, 1.1.3.2.1). Each number is

part of a group represented by the number on its left.

Email Addresses

Enter an email address to receive email alerts.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды