Lantronix EMG 8500 Скачать руководство пользователя страница 94

Страница: 94 / 416

6: Networking

EMG™ Edge Management Gateway User Guide

3. To save, click

Apply

button.

More Actions on the VPN page:



To see details of the VPN tunnel connection, including the cryptographic algorithms used,

select the

View Detailed Status

link.



To see the last 200 lines of the logs associated with the VPN tunnel, select the

View VPN

Logs

link.



To see the RSA public key for the EMG (required for configuring the remote host if RSA Public

Keys are being used), and the RSA public key for the remote peer, select the

View console

manager and Remote Peer RSA Public Key

link.



To see the X.509 Certificates for the local peer and the remote peer, select the

View X.509

Certificates

link.

Custom ipsec.conf

Configuration

A custom ipsec.conf file can be uploaded to the EMG. This file can include

any of the strongSwan options which are not configurable from the UIs. The

ipsec.conf file should include one

conn <Tunnel Name>

section which

defines the tunnel parameters. An ipsec.conf file containing more than one

conn

section will be rejected for upload.

When a custom ipsec.conf file has been uploaded to the console manager,

any VPN options configured via the UIs (with the exception of authentication

tokens, see below) are ignored, and the UIs will not display the options

given in the custom ipsec.conf file.
A description of the format of the ipsec.conf file as well as all strongSwan

options is available

here

. The EMG uses strongSwan version 5.6.3, so not

all options listed in the strongSwan ipsec.conf documentation will be

supported by the EMG.
Any authentication tokens (pre-shared keys, RSA keys, X.509 certificates)

required by the custom ipsec.conf must be configured through the EMG UIs,

and must be configured or installed before a tunnel is brought up with an

uploaded ipsec.conf file. When a tunnel is started with a custom ipsec.conf

file, the authentication tokens required for the

authby

parameter are

verified to exist before the tunnel is started. For example, if

authby=rsasig,

the EMG will verify that the EMG RSA public/private

key has been generated and that the peer RSA public key has been

uploaded.
To upload a custom ipsec.conf file, select the

Upload File

link next to the

Uploaded Configuration field.
To delete an uploaded custom ipsec.conf file, select the

Delete

Configuration File

checkbox next to the Uploaded Configuration field.

To view an uploaded custom ipsec.conf file, select the

View Configuration

link next to the Uploaded Configuration field. If a file has been uploaded it

will be displayed; otherwise the auto-generated file will be displayed if it

exists. The file is auto-generated when a tunnel is enabled (if a custom file

has not been uploaded).
To download the current in-use ipsec.conf file (either the ipsec.conf file

automatically generated by the EMG or an uploaded custom ipsec.conf file),

select the

Download Configuration

button. Downloading the ipsec.conf file

automatically generated by the EMG is a good starting point for adding

extra VPN options; the tunnel must be enabled in order for the EMG to auto-

generate an ipsec.conf file that can be downloaded.

Tunnel Restart

If enabled, the watchdog program will automatically restart the VPN tunnel

when the tunnel goes down.

Email Address

Email address to receive email alerts when the tunnel goes up or down.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды