Lantronix EMG 8500 страница 105 Скачать руководство пользователя

Страница: 105 / 416

6: Networking

EMG™ Edge Management Gateway User Guide

105

3. Click the

Apply

button.

4. In the lower section of the page, select a probe by clicking the radio button to the far right in

the probe's row. The options that are available for that probe will be ungreyed. Select one of

the following options:

The table at the bottom of the page lists information about completed and running probes.

UDP Echo Responder

Starts the UDP Echo responder on the port configured in

UDP Port

to reply to

UDP echo packets. The EMG UDP Echo responder supports one UDP echo

sender.
When the UDP Echo responder is enabled, the EMG will verify that the responder

UDP port is not being used by any other EMG processes, including port 1967

which is reserved for the UDP Jitter responder.

TCP Connect

Responder

Starts the TCP Connect responder on the port configured in

TCP Port

to reply to

TCP connect requests. The EMG TCP Connect responder supports one TCP

connect sender.
When the TCP Connect responder is enabled, the EMG will verify that the

responder TCP port is not being used by any other EMG processes.

Refresh

Refreshes the information on the Performance Monitoring page.

Add Probe

Displays the

Performance Monitoring - Add/Edit Probe

web page to add a new

probe.

Operations

Displays a list of completed operations for the selected probe and allows the user

to view either raw packet results or accumulated statistics for any operation.

Latest Results

Displays the latest raw packet results for the selected probe.

Latest Accumulated

Displays the latest accumulated statistics for the selected probe.

State: Restart

Allows the state of a probe to be controlled: the user can Restart a completed or

running probe. When a probe is added, it will automatically start running,

depending on how the probe start time is configured. Once a probe has run all of

its configured operations, it will be in the "Complete" state. If the EMG is rebooted,

all probes will automatically be restarted.

Edit Probe

Displays the

Performance Monitoring - Add/Edit Probe

web page to edit the

currently selected probe.

Delete

Deletes the selected probe, after a confirmation.

Unique identifier for the probe.

Name

Name assigned to the probe.

State

The current state of the probe: Complete if all operations have been run, or

Running if there are still operations that need to be run.

Start Time First Op

The date and time that the first operation started.

Finish Time Last Op

The date time that the most recently completed operation finished.

Error

Any errors reported by the probe:



NMT: the current repository is an external source, but the USB thumb drive or

SD card is not mounted



NDR: the repository directory for the probe does not exist



OPF: failed to open an operation data file



SCT: error initializing a socket



CFG: error retrieving probe configuration



EXP: probe start time has expired

Operations Comp/

Total

The number of operations that have been completed and the total

number of operations that will be run.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды