16: Command Reference
EMG™ Edge Management Gateway User Guide
373
faildevcelldialstr <Fail-over Device: Dialup Str>
faildevcellroam <enable|disable>
Transfer firmware update files to the EMG to initiate a firmware update on the fail-over device:
set network gateway faildevupdate <ftp|sftp|scp|usb|sdcard>
gwfile <Firmware File> radiofile <Radio File> [usbport <U1>]
[host <IP Address or Name>] [login <User Login>] [path <File
Path>]
Reboot the fail-over device, or set the fail-over device SIM Card PIN #, SIM Personal Unblocking
Key or Admin Password (any extra parameters will be ignored):
set network gateway reboot
set network gateway faildevpin
set network gateway faildevpuk
set network gateway faildevpassword
Description
Set default & fail-over gateways (the fail-over gateway is used if an IP address usually accessible
through the default gateway fails to return 1 or more pings), and configure settings for supported
fail-over devices.
set network host
Syntax
set network host <Hostname> [domain <Domain Name>]
Description
Sets the EMG host name and domain name.
set network fqdnlist
Syntax
set network fqdnlist <1-15> ipaddr <IP Address> fqdn <hostname>
Description
Updates the local hosts table for DNS lookup of FQDNs.
set network port
Syntax
set network port <1|2> <parameters>
Содержание EMG 8500
Страница 1: ...Part Number PMD 00008 Revision A October 2019 EMG Edge Management Gateway User Guide EMG 8500 ...
Страница 69: ...6 Networking EMG Edge Management Gateway User Guide 69 Figure 6 2 Network Network Settings 2 of 2 ...
Страница 302: ...14 Maintenance EMG Edge Management Gateway User Guide 302 Figure 14 12 About EMG ...