Lantronix EMG 8500 Скачать руководство пользователя

Страница: 200 / 416

10: Remote Power Managers

EMG™ Edge Management Gateway User Guide

200

Current (view only)

The total current value for the RPM in Amperes, if this information is provided by the

RPM. If the RPM consists of two separate towers or units, each with its own current

value, both current values will be displayed, separated by a slash.

Input Voltage (view

only)

The input voltage for the RPM in Volts, if this information is provided by the RPM. If

the RPM consists of two separate towers or units, each with its own input voltage

value, both voltage values will be displayed, separated by a slash.

Apparent Power

(view only)

The apparent power value for the RPM in Volt-Amperes, if this information is

provided by the RPM. If the RPM consists of two separate towers or units, each with

its own apparent power value, both power values will be displayed, separated by a

slash.

Nominal Apparent

Power (view only)

The nominal apparent power value for the RPM in Volt-Amperes, if this information is

provided by the RPM. If the RPM consists of two separate towers or units, each with

its own nominal apparent power value, both power values will be displayed,

separated by a slash.

Real Power (view

only)

The real power value for the RPM in Watts, if this information is provided by the

RPM. If the RPM consists of two separate towers or units, each with its own real

power value, both power values will be displayed, separated by a slash.

Battery Charge

(view only)

For UPS devices only. Displays the current charge level for the battery, as a

percentage.

Battery Runtime

(view only)

For UPS devices only. Displays the amount of time remaining in the UPS battery life.

Beeper Status (view

only)

For UPS devices only. Displays the current state of the UPS beeper.

Managed via (view

only)

Displays the method used to control the RPM device (SNMP, Network, Serial Port,

USB port).

IP Address

For SNMP and Network (Telnet) managed RPMs, specify the IP address of the

RPM.

Port

For network (Telnet) managed RPMs, this is assumed to be port 23 (if left blank), or

it can be filled in with an alternate TCP port. For USB managed RPMs, this is one of

the front USB ports ("0") or the device port that the RPM is connected to on the

EMG. For serially controlled RPMs, this is the device port that the RPM is connect to

on the EMG.

Driver Opts

For the driver associated with the RPM device, these are extra options which may be

required to make the driver work. The most frequent use of the driver options is for

USB devices (the vendor and product ID may be required so that the EMG can find

the correct device on the USB bus), or in the event that the default driver options do

not work with the RPM. There may also be other driver options that are filled in by

the EMG from an internal table - these will be automatically set and can be viewed

after the RPM has been added, and can always be overridden by driver options set

by the user. For a complete list of RPM models, drivers and driver options, refer to

Network UPS Tools Hardware Compatibility List

. The format of the driver options

setting is one or more comma-separated parameters-value pairs, e.g. "<parameter

name>=<value>".

Login

For Network and serially managed RPMs, this is the administrator login.

Password/Retype

Password

For Network and serially managed RPMs, this is the administrator password.

Read Community

For SNMP managed RPMs, this is the SNMP read (get) community.

Write Community/

Retype Write Comm

For SNMP managed RPMs, this is the SNMP write (set) community.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды