Lantronix EMG 8500 Скачать руководство пользователя страница 107

Страница: 107 / 416

6: Networking

EMG™ Edge Management Gateway User Guide

107

3. Modify the probe settings:

Probe Type

Select from one of the available probe types:



DNS Lookup -

Performs a DNS lookup on the hostname specified in the

Destination Host using the Name Server. By default port 53 is always used as

the Destination Port.



HTTP Get -

Performs an HTTP Get to the home (root) of the web server at the

Destination Host and Destination Port.



ICMP Echo -

Sends ICMP Echo (ping) packets to the Destination Host.



TCP Connect -

Performs a TCP Connection to the Destination Host and

Destination Port.



UDP Echo -

Sends UDP Echo packets to the Destination Host and Destination

Port.



UDP Jitter -

Sends UDP jitter packets using a simplified version of the Cisco IP

SLA v2 (Engine II) protocol to the Destination Host and Destination Port.



UDP Jitter VoIP -

Sends UDP jitter packets configured to simulate Voice over

IP network traffic (VoIP) using a simplified version of the Cisco IP SLA v2

(Engine II) protocol to the Destination Host and Destination Port.

Name

Probe name, up to 40 characters long. Valid characters are letters, numbers,

dashes (-), periods and underscores (_).

Number of Operations

Number of operations to perform for the probe. Probes can for a specific number

of operations. The valid range is 1 - 1000, and the default is 100.

Frequency between

Operations

Time between probe operations, in seconds. The valid range is 5 - 3600 seconds,

and the default is 60 seconds.

Number of Packets

Number of packets to send for each probe. For DNS Lookup probes, this is the

number of lookups to perform. For HTTP Get probes, this is the number of HTTP

Gets to perform. For TCP Connect probes, this is the number of TCP connections

to perform. The valid range is 1 - 1000 for the Local repository and 1 - 2000 for a

USB or SD card repository. The default is 10 packets.

Interval between

Packets

Interval between packets in milliseconds. The valid range is 10 - 5000

milliseconds, and the default is 500 milliseconds. For HTTP Get, DNS Lookup and

TCP Connect probes, the timeout must be less than the interval due to a new

socket being created and destroyed for each packet.

Start Time

Time to start the probe:

Now

starts the probe immediately;

At date/time

will start

the probe at the specified date and time in the future;

After waiting

will start the

probe after waiting a period of time that is less than 24 hours. When the EMG is

rebooted, the probe will start according to the

Start Time

settings: (a) immediately

if it set to

Now

, (b) at a date and time in the future if it is set to

At date/time

and

the date and time is in the future, (c) after waiting a period of time if it is set to

After waiting

Destination Host

The hostname or IP address to send packets to. For DNS Lookup probes this is

the hostname to lookup.

Destination Port

The TCP or UDP port to send packets to. For ICMP probes, the port setting is not

used. For DNS Lookup probes, the destination port is always port 53. Port 1967 is

reserved for the UDP jitter responder. The valid range is 1 - 65535.

Precision

The precision to view results in - milliseconds (the default) or microseconds. Jitter

results are always displayed in milliseconds.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды