13: User Authentication
EMG™ Edge Management Gateway User Guide
273
3. Select or clear the checkboxes for the following rights:
4. Click the
Add Group
button.
Escape Sequence
A single character or a two-character sequence that causes the EMG to
leave direct (interactive) mode. (To leave listen mode, press any key.)
A suggested value is
Esc+A
(escape key, then uppercase "A" performed
quickly but not simultaneously). You would specify this value as
\x1bA
, which
is hexadecimal
(\x)
character 27
(1B)
followed by an
A
.
This setting allows the user to terminate the
connect direct
command
on the command line interface when the endpoint of the command is
deviceport
,
tcp
, or
udp
.
Break Sequence
A series of one to ten characters users can enter on the command line
interface to send a break signal to the external device. A suggested value is
Esc+B
(escape key, then uppercase “B” performed quickly but not
simultaneously). You would specify this value as
\x1bB
, which is
hexadecimal
(\x)
character 27
(1B)
followed by a
B
.
Custom Menu
If custom menus have been created you can assign a default custom menu
to the group. See
for more information.
Display Menu at Login
Check the checkbox to display the menu at login.
Full Administrative
Right to add, update, and delete all editable fields.
Networking
Right to enter Network settings.
Services
Right to enable and disable system logging, SSH and Telnet logins, SNMP, and
SMTP.
Secure Lantronix
Network
Right to view and manage Secure Lantronix units (e.g., EMG, or SLC units) on the
local subnet.
Date/Time
Right to set the date and time.
Reboot & Shutdown
Right to shut down and reboot the EMG unit.
Local Users
Right to add or delete local users on the system.
Remote
Authentication
Right to assign a remote user to a user group and assign a set of rights to the user.
SSH Keys
Right to set SSH keys for authenticating users.
User Menus
Right to create a custom user menu for the CLI.
Web Access
Right to access Web-Manager.
Diagnostics &
Reports
Right to obtain diagnostic information and reports about the unit.
Firmware &
Configuration
Right to upgrade the firmware on the unit and save or restore a configuration (all
settings). Selecting this option automatically selects
Reboot & Shutdown
.
Internal Modem
Right to update internal modem settings.
Device Port
Operations
Right to control device ports.
Device Port
Configuration
Right to enter device port settings.
USB
Right to enter modem settings for USB devices and control USB storage devices.
SD Card
Right to enter settings for SD card.
RPM
Right to manage and control remote power managers.
Содержание EMG 8500
Страница 1: ...Part Number PMD 00008 Revision A October 2019 EMG Edge Management Gateway User Guide EMG 8500 ...
Страница 69: ...6 Networking EMG Edge Management Gateway User Guide 69 Figure 6 2 Network Network Settings 2 of 2 ...
Страница 302: ...14 Maintenance EMG Edge Management Gateway User Guide 302 Figure 14 12 About EMG ...
