Lantronix EMG 8500 страница 166 Скачать руководство пользователя

Страница: 166 / 416

9: Device Ports

EMG™ Edge Management Gateway User Guide

166

4. To save, click

Apply

Device Port - Sensorsoft Device

Devices made by Sensorsoft are used to monitor environmental conditions.
1. Connect to a specific port on the

Devices > Device Ports

page according to instructions in

To open the Device Ports - Settings page: (on page 152)

2. In the

Connected to

drop-down menu above the IP Settings section of the

Device Ports > Settings (1 of 2)

page, select

Sensorsoft

Note:

Sensorsoft temperature/humidity devices are supported with USB-to-serial adapters (ftdi/

pl2303/cp210x) but not supported for use with USB-to-Serial CDC_ACM devices.

3. Click the

Device Commands

link. The following page displays:

Outlet

For each managed power supply, enter the outlet on the selected RPM. As an aid to

selecting the outlet, click the

View Outlets

button, then select an outlet from the list

and click the

Select Outlet

button. The managed power supply outlet number will be

filled in, as well as the managed power supply outlet name if a name is listed for the

outlet and one has not already been defined for the managed power supply. A

unique name for the managed power supply name is required; this is what will be

displayed on the Power Management menu.

Name

For each managed power supply, enter the name on the selected RPM. As an aid to

selecting the name, click the

View Outlets

button, then select an outlet from the list

and click the

Select Outlet

button. The managed power supply outlet number will be

filled in, as well as the managed power supply outlet name if a name is listed for the

outlet and one has not already been defined for the managed power supply. A

unique name for the managed power supply name is required; this is what will be

displayed on the Power Management menu.

State

Displays the current state of the outlet when the Device Ports - Power Management

web page is loaded:

off

unknown

if the RPM does not provide status for

individual outlets or the EMG was unable to obtain the status of the outlet.

Action

The action to take on the outlet:

Cycle Power

Off

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды