Lantronix EMG 8500 Скачать руководство пользователя страница 185

Страница: 185 / 416

9: Device Ports

EMG™ Edge Management Gateway User Guide

185

Login/CHAP Host

The login name (for PAP authentication) or CHAP host (for CHAP authentication)

associated with this site. If a modem has sites enabled and the authentication is

successful at dial-in (for modem states dial-in, dial-back, CBCP server, dial-in &

dial-on-demand, or dial-back & dial-on-demand), and the name that was

authenticated matches the Login/CHAP Host, the site parameters will be used for

the remainder of the modem connection.

CHAP Secret/Retype

The CHAP secret associated with this site. If a modem has sites enabled and

CHAP authentication enabled, then at dial-in, if the remote server sends a name

in the CHAP challenge response that matches the CHAP host of a site, the CHAP

secret for the site will be used to authenticate the CHAP challenge response sent

by the remote server.

Authentication

The type of authentication,

PAP

CHAP

, for which this site is applicable. On

dial-in authentication, only sites with the authentication type that matches the

authentication type configured for the modem will be used to try to find a matching

site.

Timeout Logins

For text dial-in connections, the connection can time out after the connection is

inactive for a specified number of minutes.

Negotiate IP Address

If the EMG and the remote server should negotiate the IP addresses for each side

of the PPP connection, select Yes. Select No if the address of the EMG unit

(

Local IP

) and remote server (

Remote IP

) need to be specified.

Static Route IP

Address

The Static Route IP Address, Subnet Mask and Gateway must be configured for

dial-on-demand sites. The EMG will automatically dial-out and establish a PPP

connection when IP traffic destined for the network specified by the static route

needs to be sent.

Note:

Static Routing must be enabled on the Network - Routing page for dial-on-

demand connections.

Static Route Subnet

Mask

The subnet mask for a dial-on-demand connection.

Static Route Gateway

The gateway for a dial-on-demand connection.

Dial-out Number

The dial-out number must be specified for dial-on-demand sites. This indicates

the phone number to dial when the EMG unit needs to send IP traffic for a dial-on-

demand connection.

Dial-out Login

User ID for authentication when dialing out to a remote system, or when a remote

system requests authentication from the EMG unit when it dials in. May have up

to 32 characters. This ID is used for authenticating the EMG during the dial-out

portion of a dial-back (including CBCP server) and dial-on-demand.

Dial-out Password

Password for authentication when dialing out to a remote system, or if a remote

system requests authentication from the EMG unit when it dials in. May have up

to 64 characters

Retype Password

Re-enter password for dialing out to a remote system. May have up to 64

characters.

Dial-back Number

The phone number to dial on callback for text or PPP dial-back connections. A

site must successfully authenticate, have

Allow Dial-back

enabled and have a

Dial-back Number defined in order for the site to be used for callback.

Allow Dial-back

If enabled, the site is allowed to be used for dial-back connections.

Dial-back Delay

For dial-back and CBCP Server, the number of seconds between the dial-in and

dial-out portions of the dialing sequence.

Dial-back Retries

For dial-back and CBCP Server, the number of times the EMG unit will retry the

dial-out portion of the dialing sequence if the first attempt to dial-out fails.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды