Kubota ME8200DTN, Дополнение к руководству по ремонту

Страница: 108 / 192

ME8200DTN, WSM REAR AXLE
N4-S3
3. CHECKING, DISASSEMBLING AND SERVICING
[1] DISASSEMBLING AND ASSEMBLING
(1) Separating Rear Axle Case from Transmission Case
Draining Transmission Fluid
1. Place oil pans underneath the transmission case.
2. Remove the drain plugs (1).
3. Drain the transmission fluid.
4. Reinstall the drain plugs (1).
(When reassembling)
A
Fill up from filling port after removing the filling plug until
reaching the dipstick.
A
After running the engine for few minutes, stop it and check the
fluid level again, add the fluid to prescribed level if it is not
correct level.
A
Use only KUBOTA SUPER UDT fluid. Use of other oils
may damage the transmission or hydraulic system.
A
Refer to "LUBRICANTS, FUEL AND COOLANT" (See
page NG-2.)
A
Do not mix different brands fluid together.
Draining Fuel
1. Place oil pans under the fuel tank.
2. Remove the drain plugs (1).
3. Drain the fuel.
4. Reinstall the drain plugs (1).
Transmission fluid Capacity
33.0 L
34.88 U.S.qts
29.04 lmp.qts
(1) Drain Plug
0000003403E
Fuel Capacity
60 L
15.9 U.S.gals
13.2 Imp.gals
(1) Drain Plug
0000003461E
KiSC issued 04, 2006 A