Keithley System SourceMeter 2601B, Справочное руководство

Страница: 490 / 864

Section 7: TSP command reference Series 2600B System SourceMeter® Instrument Reference Manual
7-150 2600BS-901-01 Rev. B / May 2013
opc()
This function sets the operation complete status bit when all overlapped commands are completed.
Type TSP-Link accessible Affected by Where saved Default value
Function No
Usage
opc()
Details
This function causes the operation complete bit in the Standard Event Status Register to be set when all
previously started local overlapped commands are complete.
Note that each node independently sets its operation complete bits in its own status model. Any nodes that are
not actively performing overlapped commands set their bits immediately. All remaining nodes set their own bits
as they complete their own overlapped commands.
Also see
Status model (on page 5-14, on page E-1)
waitcomplete() (on page 7-380)
os.remove()
This function deletes the file or directory with a given name.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
success , msg = os.remove( filename )
success A success indicator (
true
or
nil
)
msg A message value (
nil
or an error message)
filename A string representing the name of the file or directory to delete
Details
Directories must be empty before using the
os.remove()
function to delete them.
If this function fails, it returns
nil
(for
success
) and an error message string (for
msg
).
Example
os.remove("testFile") Delete the file named
testFile
.
Also see
os.rename() (on page 7-151)