Keithley System SourceMeter 2601B, Справочное руководство

Страница: 431 / 864

Series 2600B System SourceMeter® Instrument Reference Manual Section 7: TSP command reference
2600BS-901-01 Rev. B / May 2013 7-91
fileVar:seek()
This function sets and gets a file's current position.
Type TSP-Link accessible Affected by Where saved Default value
Function No
Usage
position, errorMsg = fileVar :seek()
position, errorMsg = fileVar :seek( whence )
position, errorMsg = fileVar :seek( whence , offset )
position The new file position, measured in bytes from the beginning of the file
errorMsg A string containing the error message
fileVar
The file descriptor variable
whence A string indicating the base against which
offset
is applied; the default is
"cur"
offset The intended new position, measured in bytes from a base indicated by
whence
(default is
0
)
Details
The
whence
parameters may be any of the following:
"set"
: Beginning of file
"cur"
: Current position
"end"
: End of file
If an error is encountered, it is logged to the error queue, and the command returns
nil
and the error string.
Also see
io.open() (on page 7-108)
fileVar:write()
This function writes data to a file.
Type TSP-Link accessible Affected by Where saved Default value
Function No
Usage
fileVar :write( data )
fileVar :write( data1 , data2 )
fileVar :write( data1 , ..., datan )
fileVar The file descriptor variable
data
Write all data to the file
data1
The first data to write to the file
data2 The second data to write to the file
datan The last data to write to the file
...
One or more entries (or values) separated by commas