Section 7: TSP command reference
Series 2600B System SourceMeter® Instrument Reference Manual
7-112
2600BS-901-01 Rev. B / May 2013
Example
lan.applysettings()
Re-initialize the LAN interface with new settings.
Also see
None
lan.autoconnect
This attribute is used to enable or disable link monitoring.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
1 (lan.ENABLE)
Usage
state
= lan.autoconnect
lan.autoconnect =
state
state
LAN link monitoring state:
1
or
lan.ENABLE:
Enables automatic link reconnection and monitoring
0
or
lan.DISABLE:
Disables automatic link reconnection and monitoring
Details
This attribute sets the LAN link monitoring and automatic connection state.
When this is set to
lan.ENABLE
, all connections are closed if the link to the LAN is lost for more than the time
specified by
lan.linktimeout
.
Set this attribute to
lan.ENABLE
to automatically reset the LAN connection after the LAN link is established.
Also see
lan.linktimeout
(on page 7-119)
lan.restoredefaults()
(on page 7-121)
lan.config.dns.address[N]
Configures DNS server IP addresses.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
"0.0.0.0"
Usage
dnsAddress
= lan.config.dns.address[
N
]
lan.config.dns.address[
N
] =
dnsAddress
dnsAddress
DNS server IP address
N
Entry index (1 or 2)
Содержание System SourceMeter 2601B
Страница 841: ......