Keithley System SourceMeter 2601B, Справочное руководство

Страница: 525 / 864

Series 2600B System SourceMeter® Instrument Reference Manual Section 7: TSP command reference
2600BS-901-01 Rev. B / May 2013 7-185
Usage
calDate = smu X .cal.date
smu X .cal.date = calDate
calDate The calibration date of the active calibration set
X Source-measure unit (SMU) channel (for example,
smua.cal.date
applies to
SMU channel A)
Details
This attribute stores the calibration date that is associated with the active calibration set. The calibration date can
be read at any time but can only be assigned a new value when calibration has been enabled with the
smu X .cal.unlock()
function. It is typically set to the date when the instrument was calibrated.
This attribute is stored with the active calibration set. If a different calibration set is restored, this attribute will
reflect the date stored with that set.
smu X .cal.date
must be set to the date the calibration was done using the UTC time and date. The date is
stored as the number of seconds since UTC 12:00 am Jan 1, 1970.
Due to the internal storage format,
smu X .cal.date
is accurate to within a few minutes of the value set.
Example
smua.cal.date = os.time() Sets calibration date for SMU channel A to the current time
set on the instrument.
Also see
Adjustment (on page B-18)
os.time() (on page 7-151)
smuX.cal.adjustdate (on page 7-184)
smuX.cal.due (on page 7-185)
smuX.cal.lock() (on page 7-186)
smuX.cal.restore() (on page 7-188)
smuX.cal.save() (on page 7-189)
smuX.cal.state (on page 7-189)
smuX.cal.unlock() (on page 7-190)
smuX.cal.due
This attribute stores the calibration due date for the next calibration.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes SMU cal. restore SMU nonvolatile
memory 0
Usage
calDue = smu X .cal.due
smu X .cal.due = calDue
calDue Due date of next calibration (
0
indicates that no date is set)
X Source-measure unit (SMU) channel (for example,
smua.cal.due
applies to
SMU channel A)