Keithley System SourceMeter 2601B, Справочное руководство

Страница: 392 / 864

Section 7: TSP command reference Series 2600B System SourceMeter® Instrument Reference Manual
7-52 2600BS-901-01 Rev. B / May 2013
digio.trigger[N].EVENT_ID
This constant identifies the trigger event generated by the digital I/O line N. This constant is not available on the
Models 2604B/2614B/2634B.
Type TSP-Link accessible Affected by Where saved Default value
Constant Yes
Usage
eventID = digio.trigger[ N ].EVENT_ID
eventID The trigger event number
N Digital I/O trigger line (1 to 14)
Details
To have another trigger object respond to trigger events generated by the trigger line, set the other object's
stimulus attribute to the value of this constant.
Example 1
digio.trigger[5].stimulus =
digio.trigger[3].EVENT_ID
Uses a trigger event on digital I/O
trigger line 3 to be the stimulus for
digital I/O trigger line 5.
Also see
None
digio.trigger[N].mode
This attribute sets the mode in which the trigger event detector and the output trigger generator operate on the
given trigger line. This attribute is not available on the Models 2604B/2614B/2634B.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes
Instrument reset
Digital I/O trigger
N
reset
Recall setup
Not saved
0
(digio.TRIG_BYPASS)
Usage
triggerMode = digio.trigger[ N ].mode
digio.trigger[ N ].mode = triggerMode
triggerMode The trigger mode; see
Details
for values
N Digital I/O trigger line (1 to 14)