Keithley System SourceMeter 2601B, Справочное руководство

Страница: 438 / 864

Section 7: TSP command reference Series 2600B System SourceMeter® Instrument Reference Manual
7-98 2600BS-901-01 Rev. B / May 2013
gettimezone()
This function retrieves the local time zone.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
timeZone = gettimezone()
timeZone
The local timezone of the instrument
Details
See
settimezone()
for additional details about the time zone format and a description of the fields.
timeZone
can be in either of the following formats:
•
If one parameter was used with
settimezone()
, the format used is:
GMThh:mm:ss
•
If four parameters were used with
settimezone()
, the format used is:
GMThh:mm:ssGMThh:mm:ss,Mmm.w.dw/hh:mm:ss,Mmm.w.dw/hh:mm:ss
Example
timezone = gettimezone() Reads the value of the local timezone.
Also see
settimezone() (on page 7-178)
gm_isweep()
This KIParlib factory script function performs a linear current sweep and calculates the transconductance (Gm) at
each point.
Type TSP-Link accessible Affected by Where saved Default value
Function No
Usage
gm_array, vbuf, ibuf = gm_isweep( smu, start_i, stop_i, points )
gm_array A Lua table containing the calculated Gm values at each point
vbuf
A reading buffer containing the measured voltage at each point
ibuf A reading buffer containing the measured current at each point
smu
System SourceMeter
®
instrument channel (for example,
smua
refers to SMU
channel A)
start_i
Starting current level of the sweep
stop_i Ending current level of the sweep
points
Number of measurements between
start_i
and
stop_i
(must be
≥
2)