Keithley System SourceMeter 2601B, Справочное руководство

Страница: 493 / 864

Series 2600B System SourceMeter® Instrument Reference Manual Section 7: TSP command reference
2600BS-901-01 Rev. B / May 2013 7-153
Example 1
x = 10
print(x)
Example of an output response message:
1.01
Note that your output might be different if you set
your ASCII precision setting to a different value.
Example 2
x = 10
print(tostring(x))
Example of an output response message:
10
Also see
format.asciiprecision (on page 7-92)
printbuffer()
This function prints data from tables or reading buffer subtables.
Type TSP-Link accessible Affected by Where saved Default value
Function No
Usage
printbuffer( startIndex , endIndex , bufferVar)
printbuffer( startIndex , endIndex , bufferVar , bufferVar2 )
printbuffer( startIndex , endIndex , bufferVar , ..., bufferVar N )
startIndex
Beginning index of the buffer to print
endIndex Ending index of the buffer to print
bufferVar Name of first table or reading buffer subtable to print; may be a
default buffer (
defbuffer1
or
defbuffer2
) or a user-defined
buffer
bufferVar2
Second table or reading buffer subtable to print; may be a default
buffer (
defbuffer1
or
defbuffer2
) or a user-defined buffer
bufferVarN
The last table or reading buffer subtable to print; may be a default
buffer (
defbuffer1
or
defbuffer2
) or a user-defined buffer
...
One or more tables or reading buffer subtables separated with
commas
Details
The correct usage of this function for a buffer containing
n
elements is:
1 ≤
startIndex
≤
endIndex
≤
n
Where
n
refers to the index of the last entry in the tables to be printed.
If
endIndex
<
startIndex
or
n
<
startIndex
, no data is printed. If
startIndex
≤ 1, 1 is used as
startIndex
. If
n
<
endIndex
,
n
is used as
endIndex
.
When any given reading buffers are used in overlapped commands that have not yet completed (at least to the
desired index), this function outputs data as it becomes available.