Karl Storz 20 7010 20-1 Скачать руководство пользователя

Страница: 163 / 170

05.13 / V1.0

4-5

UNIDRIVE

S III

Connect the footswitch.

✓

The error message

E12

(no motor) is displayed.

Connect a handpiece to the motor socket M1.

✓

The handpiece is recognized and the corresponding information displayed. e.g. P0, P1, etc.

Press the right footswitch pedal.

✓

The motor starts.

Release the footswitch pedal.

✓

The motor stops immediately.

Change the direction of rotation by pressing the mid button of the footswitch.

✓

The displayed direction of rotation changes.

For devices with motor socket M2:

Connect a handpiece to the motor socket M2.

Select the handpiece M2 by pressing the M button.

✓

The handpiece is recognized and the corresponding information displayed.

Press the right footswitch pedal.

✓

The motor starts.

Release the footswitch pedal.

✓

The motor stops immediately.

Change the direction of rotation by pressing the mid button of the footswitch.

✓

The displayed direction of rotation changes.

For devices providing a pump:

Press the left footswitch pedal.

✓

The pump starts running.

Change the flow of the pump pushing the

+/-

buttons on the display.

✓

The pump has to run regularly at all settings.

Open the tensioning lever of the pump.

✓

The error message

E16

(irrigation pump not closed

)

is displayed.

Close the tensioning lever of the pump again.

✓

The error message disappears.

Содержание 20 7010 20-1











































































































































































Результаты поиска

Содержание 20 7010 20-1

Отзывы:

Похожие инструкции для 20 7010 20-1

Бренды по названию

Популярные бренды

Karl Storz 20 7010 20-1, Руководство по обслуживанию

Результаты поиска

Содержание 20 7010 20-1

Отзывы:

Похожие инструкции для 20 7010 20-1

Бренды по названию

Популярные бренды