Karl Storz 20 7010 20-1 Скачать руководство пользователя

Страница: 162 / 170

4-4

05.13 / V1.0

UNIDRIVE

S III

✓

The handpiece is recognized and the corresponding information displayed.

Press the right footswitch pedal.

✓

The motor starts.

Release the footswitch pedal.

✓

The motor stops immediately.

Change the direction of rotation by pressing the mid button of the footswitch.

✓

The displayed direction of rotation changes.

For devices with motor socket M2:

Connect a handpiece to the motor socket M2.

Select the handpiece M2 on the touch screen.

✓

The handpiece is recognized and the corresponding information displayed.

Press the right footswitch pedal.

✓

The motor starts.

Release the footswitch pedal.

✓

The motor stops immediately.

Change the direction of rotation by pressing the mid button of the footswitch.

✓

The displayed direction of rotation changes.

For devices providing a pump:

Press the left footswitch pedal.

✓

The pump starts running.

Change the flow of the pump via touch screen.

✓

The pump has to run regularly at all settings.

Open the tensioning lever of the pump.

✓

The error message E16

Irrigation pump not closed

is displayed.

Close the tensioning lever of the pump again.

✓

The error message disappears.

4.2.4. System Information

By pressing the

wrench

button switch to the

Settings

menu and choose

System Information

Check the displayed system information.

✓

The serial number displayed on the touch screen has to comply with the one printed on the labelling

at the back of the housing cover.

Note the displayed software versions.

Return to the

Settings

menu by pressing the

button.

4.2.5. Test for proper operation ECO devices

Connect the power cord and switch the device on.

✓

While switched on the power switch has to be illuminated.

✓

The error message

E11

(no footswitch) is displayed.

Содержание 20 7010 20-1











































































































































































Результаты поиска

Содержание 20 7010 20-1

Отзывы:

Похожие инструкции для 20 7010 20-1

Бренды по названию

Популярные бренды

Karl Storz 20 7010 20-1, Руководство по обслуживанию

Результаты поиска

Содержание 20 7010 20-1

Отзывы:

Похожие инструкции для 20 7010 20-1

Бренды по названию

Популярные бренды