Jumil 3090PD, Инструкция по эксплуатации

Страница: 108 / 176

108
3090PD
OCCURRENCE
ATTENTION:
When disassembling any component that will not make further use, give the correct
destination by sending for recycling (scrap metals, plastics, and other products). When disposing
of this product, seek recyclers observing compliance with local laws. Do not leave discarded items
thrown to the ground. Preserve the environment.
8 - OCCURRENCE, POSSIBLE CAUSES AND SOLUTIONS
Incidents Possible Causes Solutions
Hitch is not aligned with the
drawbar tractor
Not positioned in the engagement hole alignment Position the hitch hole in the header pair align
to the drawbar
The drawbar tractor is not positioned properly, or
does not have resources to turn
Position the drawbar for the coupling. Use the
drawbar with step or step and head
Did not make the header height adjustment
Make the adjustment of the height of the head,
through the regulator
The seeder is playing from
one side to another
La barra de tiro del tractor esta floja
The drawbar tractor this loose
Attach the drawbar of the tractor in the center
hole
Can not make the coupling of
the hoses quick couplers on
tractor
The seeder was disengaged with this pressure or
bearing the weight of the same hydraulic system
Drain hoses or place the planter foot support
and finally relieve pressure
Hitch is not aligned with the
drawbar tractor
Not positioned in the engagement hole alignment Position the hitch hole in the header pair align
to the drawbar
The drawbar tractor is not positioned properly, or
does not have resources to turn
Position the drawbar for the coupling. Use the
drawbar with step or step and head
Did not make the header height adjustment
Make the adjustment of the height of the head,
through the regulator
The seeder is playing from
one side to another
The drawbar tractor this loose
Attach the drawbar of the tractor in the center
hole
Can not make the coupling of
the hoses quick couplers on
tractor
The seeder was disengaged with this pressure or
bearing the weight of the same hydraulic system
Drain hoses or place the planter foot support
and finally relieve pressure
Hydraulic cylinders stop
running, and then raises the
seeder does not lower or vice
versa
Quick Coupler different male and female ball-
needle type or vice versa
Do the exchange of quick coupler, putting two
of the same type
The planter does not maintain
the set position, descend be
controlled
Divider valve damaged Replace repair or replace divider valve
Endoleak in the lift cylinders Replace plumbing repairs
The seeder does not lifting There was withdrawn shipping lock the tread Remove the shipping lock the tread
The seeder does not lifting There was withdrawn shipping lock the tread Remove the shipping lock the tread
Hydraulic system operating
slowly
Oil viscosity too high Replace the hydraulic oil
Low oil level in reservoir Check level and fill with recommended oil
Leaks
Check the component: gaskets, fittings,
hydraulic hoses, repair or replace
The hydraulic system drives
the hydraulic cylinders
Error in the coupling of hydraulic hoses flow and
return
Attach the hydraulic hoses correctly in the input
and return the tractor hydraulic system
The repairs of the flow divider valve for damage Perform repairs the flow divider valve, or
replace the flow divider valve
Repairs to hydraulic cylinder for damage
Make repairs to the hydraulic cylinder or
replace the hydraulic cylinder
Hydraulic hoses and connections are damaged
(quick coupling, leakage, etc.).
Replace the quick coupler damaged. Replace
the damaged hydraulic hose
Insufficient oil in system Complete the oil level
Leaks
Check components: seals, fittings, hydraulic
hoses, repair or replace
Presence of air in the hydraulic cylinders Make bleeding of hydraulic cylinders