Jumil 3090PD, Инструкция по эксплуатации

Страница: 39 / 176

39
3090PD
Fig. 027
A
Fig. 026
A
B
IMPORTANT:
Plants emergency - leveling provides an easier breaking straw without stuffing and decease the tractor’s
required power to pull the machine.
The planting depth is managed mainly by the adjustment exerted in the Fertilizer pressure and the
depth controlling Wheels of the seed line.
Fig. 028
d) Before engaging note identifying the hoses drive the hydraulic system of the tractor, they are given “exit
pressure” and “back pressure”.
e) After planter attached to the tractor, engage the hydraulic cylinder, lift the feet and “A” (Fig. 027) and secure
them by locking pin and steel latch. Then dismiss the whole mechanical lift and attach it to the hitch bar header.
4.1.2 - Leveling of the Planter
Incorrect adjustment of leveling the planter can cause irregular depths in planting. As a result, many plants
can sprout and then die due to poor coverage of the earth; germinate or not, the result of a lot of depth in planting. To
ensure optimum efficiency of the planting units, the planter should be completely level longitudinally and transversely.
The leveling the planter must be made at the place of planting, to do it as instructed below:
a) Lower the planter to the ground, walk about 10 meters and make sure that the same level relative to the
ground. Otherwise, make regulation of leveling.
b) by the header (Fig. 028) move the regulator extender until the side of the chassis is aligned relative to the
ground (Fig. 029). When extending the length of the header regulator, planter tends to lean backward when shortens
the length of the header regulator, planter tends to tilt forward.
When making leveling also implement resource-coupling hitch with ball joint, which can be coupled in the he-
ader at the top or bottom position (Fig. 026).
IMPLEMENT MOUNTING