Jumil 3090PD, Инструкция по эксплуатации

Страница: 88 / 176

88
3090PD
Fig. 077 Fig. 076
Fig. 078
A
Fig. 079
A
B
The pantograph system has three adjustment points positioned on both sides of the frame of the planter units.
Nearby points of adjustments are positioned 26 mm apart. When positioned in the upper hole the pantograph arms now
have more articulation. Fixation is accomplished through lock pin that limit the articulation of the arms of the pantograph
“A” (Fig. 078).
ATTENTION:
When making the adjustment make sure the locking pin is not picking up the transmission distributor
seed system. To prevent distribution or transmission locking mount system failures lock pin in the opposite
direction to the gimbal.
4.14.2 - Stem with triple springs
Has rod assembly with regulator dual springs with trunnion to regulate the pressure of the stands on the grou-
nd and top pin settings for the position of the cart “A” (Fig. 079).
The pressure control of seeders over ground units, is effected by the pressure made by the regulator. Pressing
down will give more pressure to the springs.
4.14.3 - Telescopic Cardan and box cross
The telescopic driveshafts have hoods for protection against impurities at work “B” (Fig. 079). Should be kept
lubricated daily due to the constant effort of driving.
4.14.4 - Dual Disc seeders
The machine comes with standard and double mismatched seeder 14“disc (Fig. 080), with fixed bearings with
ball bearings. In mounting configuration of the implement in the act of sale also allows the mounting of the following
options:
IMPLEMENT MOUNTING