Jumil 3090PD, Инструкция по эксплуатации

Страница: 42 / 176

42
3090PD
Fig. 034
b) Position Number Lines with Line Pair :
Mark the center of the chassis, measure spacing means for spacing right and half to the left, then check these
points the first two lines, these brands leave the other lines with the spacing for each side. Perform the same operation
on the front clamp bar unit and cutting compost disc and rear bar for setting the seeder units. Example: 10 lines of 550
mm in a planter
3090PD
chassis with 12 lines.
c) Position Lines with Odd Number of Lines :
Mark the center of the chassis, then fasten a line in the center of the chassis, leaving just the other lines with
the desired spacing. example:
07 lines of 450 mm in a planter 3090PD chassis with 08 lines.
To make the mounting number of lines or different spacing of the original version of the planter, you should
proceed as follows:
a) Check the table (Fig. 035), below for spacing allowed according to the model of your planter, as well as the
useful space of each model and the number of wheels.
IMPLEMENT MOUNTING