Jumil 3090PD, Инструкция по эксплуатации

Страница: 30 / 176

30
3090PD
TECHNICAL SPECIFICATIONS
Power required for the work of the equipments.
The indication of the required power shall always be a doubt on the part of technicians and customers.
We should consider that:
- The tractor’s power should be expressed on the traction bar, or on the PTO.
- The power demand is conditioned to the work factors and in the case of seeding and planting machines, it varies according to:
1 - The number of working lines;
2 - The type of groundbreaker: double disk, plough knife, cutting disk;
3 - Soil type;
4 - Soil humidity;
5 - Displacement speed.
- Our manuals indicate a power demand based on regular working conditions and that can be summarized as follows:
When using the deep fertilizing furrow, add at least 3 hp per line to the value indicated, observing the soil type, humidity, work depth and
speed.
Model 8L 10L 12L 13L 15L 18L
Height (A) 2150 2150 2150 2150 2400 3000
Width (B) 4060 4750 5700 6300 7220 8350
Length (C) 2450 2450 2450 2450 2450 2450
A
C
B
variável
1.2 - Dimensions for Transport
- The capacities of Fertilizers and Seeds are approximate and can vary according to the density.
- Tire 7.50-16 12 canvas
- Cardan Drive Turbine 540 rpm (Standard), Cardan Drive Turbine 1000 rpm (Optional), Hydraulic Motor Drive Turbine (Optional), and
needed tractors equipped with continuous flow controller with minimum flow of 27 liters per minute for 1 turbine and 54 liters per minute for
2 turbines.
** The values indicated are approximate, since the machines can have optional assembly configurations.
* If Number of Lines and Spacing configurations not specified are requested, the engineering sector must be consulted.
ATTENTION:
JUMIL reserves the right to make changes in the specifications of this product without prior notice,
without being required to effect repairs on implements sold, except in the case of noncompliance techniques
that may affect the safety or performance of the product.
1.3 - Definition of use
The planter fertilizer
3090PD
was developed for tillage soybean, corn, beans, cotton, sorghum, sunflower,
rice, peanuts and other coarse grains. It also has the option to use conventional tillage, when used without the disk
drives cutting (NR-12, item 14.2, letter f).