Jumil 3090PD, Инструкция по эксплуатации

Страница: 94 / 176

94
3090PD
4.15.9 - Calculating the amount of seeds per hectare
Calculating the amount of seeds per hectare
To perform the tests the distribution of seed per hectare, it is important that the amount of seed (kg) per hectare
is first defined, and line spacing. Based on this information applies to the following formula.
Fórmula: Q x E
D
Where:
Q = Quantity of seed to be distributed per hectare
E = Row spacing (mm)
D = 100 linear meters (m)
Example:
Let’s assume that you want to be distributed 175 kg of wheat seed per hectare, assuming the average size of
the seed that we are planting 1020 seeds 50 grams, and the spacing between lines of sowing units is 170 mm, and we
travel a distance of 100 linear meters.
175 x 170 = 297.5 grams
100
4.15.10 - Treated seed
Seed treatment is a practice that has been widespread in recent years to protect the seeds in the soil until
germination, as well as the roots and aerial parts of the plant after its emergency.
When the use of treated seeds that recommendations are noted below. Recalling that Jumil is not responsible
for possible production losses caused by inappropriate use.
IMPORTANT:
Treated seeds can be used only after the same are dry. The wet seed treatment causes the accumulation
of impurities in corrugated rotors hampering the delivery of seeds.
Dry the seeds in shade. Sometimes treatment alters seed size, differences in the distribution of seeds
may occur. Perform practice tests before you start planting. Use graphite powder in the seed.
Perform daily cleaning of corrugated rotors, whenever you use treated seed / inoculated.
DANGER:
When using treated seeds and defensive, to make the supply of deposits seed use masks,
gloves and shirts with long sleeves.
Check the packaging of the product manufacturer’s recommendations as to the hazards and
first aid measures when using the product.
4.15.11 - Practice tests to check the distribution of seeds
The test for measuring the distribution of seeds should be done in very ground we will make seeding. To do
this, proceed as follows;
a) Check and maintain the recommended tire size;
b) Supply deposits seed at least halfway. Scroll down a few meters to the distribution box are totally smell;
c) Check the distance to the test (50 linear feet);
d) Place containers at the exits of seeds (plastic bags;
e) Move the tractor in the demarcated space, using the same speed that will work at sowing;
f) Weigh the seed that fell within the container, take the mean of the distribution. If necessary make further
testing distribution by changing the setting if necessary;
g) Check the soil depth of seeding;
h) If it is necessary to increase or decrease the amount of seed to be distributed check on the seed gear lever
table gear ratio that should be used. Remember that you can use the features of the distribution of the distribution box
with acanelados rotor.
IMPORTANT:
The variation in operating speed, affects the distribution of seeds.
Every time we make the change batch or supplier of seed is necessary to assess the distribution again.
After the first day of planting, check all settings Drill.
The seeder to be used must be previously set to distribute the desired number of seeds. For greater
accuracy in setting the seeder to use, if available, previously classified seeds, making the adjustment tables as
previously seen.
IMPLEMENT MOUNTING