JAC J5, Руководство пользователя

Страница: 33 / 166

Support-free engine hood
(if equipped)
A hydraulic support rod is attached to
the support-free engine hood if equip
-ped to your car. When opening the
engine hood, you need only to lift it.
You can close it only by pressing it
downward with force. Procedure of
opening/closing the support freeengine
hood is as below:
1. Pull out the engine hood to release
switch.
2. Reach out your hand into the inner
side of the engine hood front edge to
release its safety yoke rod and then lift
the engine hood.
3. You can close it only by pressing it
downward with force, till it's locked.
4. Check the lock catch for firm locking
after closing the engine hood.
Engine hood
Strut bar engine hood
The engine hood release switch is
located at the lower left of the driver
cab console. Open/close operation
procedure comes as follows:
1. Pull outward the engine hood switch.
2. Reach out your left hand into the
inner side of the engine hood front
edge, release the safety poke rod and
lift the engine hood.
3. Support the engine hood with the
strut bar.
4. Remove the strut bar before closing
the engine hood. Slowly lower it. Make
it drop 30cm away from its lock point.
Make sure that the engine hood falls
back to its original location and is
locked.
Make the wiper fully contact the
windshield before opening the engine
hood. Or, the wiper arm may be
damaged by the engine hood.
26