JAC J5, Руководство пользователя

Страница: 107 / 166

State
Display
Sleep
When vehicle is stopped, "---" will be showed in the dispaly area
Wakeup
After the vehicle speed exceeds 25Km/h, the sensor will wake up and each
tire
爷 s pressure and temperature will be displayed as per the wheel
sequence.
If every green lamp is lighted, tire pressure and temperature will be
sequentially displayed. If the vehicle is not started within 60s or all
tire 爷 s parameters are in normal after the vehicle started, the display
screen will be turn off in order not to interfere the vision of driver,
but at the same time, the display still receive or monitor the tire
signal.
The warning sound and red lamp
They will show when some tire 爷 s pressure is
lower than 190KPA.
High-pressure
warning
The warning sound and red lamp
They will show when some tire 爷 s pressure is
higher than 300KPA.
Pressure-release
warning
The warning sound and
digit flashing
They will show when some tire 爷 s pressure is
quickly decreasing.
High-temperature
warning
Warning sound and
red lamp
They will show when some tire 爷 s temperature
is higher than 75 益 .
Normal
warning
Low
–
pressure
warning
Tire pressure monitoring system
Power steering
If the engine is running, do not hold the
steering wheel at its limit position for
more than 10s. When it is continuously
held in its limit position, a system noise
will be produced. That is because the
power steering pump under high load
will cause the temperature of hydraulic
oil circulated in it to rapidly rise. That
will cause damage to the power
steering system.
Wheel alignment
The alignment parameters of the
wheels shall be examined and adjusted
by personnel authorized by the JAC
authorized after-service centers at
least once every 10,000km mileage.
100