JAC J5, Руководство пользователя

Страница: 18 / 166

If the ABS alarm lamp remains on
or comes on during driving, it
means that the ABS system may
fail to work. Avoid the emergency
braking. Contact the nearest JAC
authorized after-service center for
checking.
Left/right turn indicator lamp
The L/R turn indicator lamp is used to
determine whether the turn lights work
normally.
The
green flash arrow on the
instrument board is used to display the
turning signal. If the arrow remains
displayed and does not flash or if its
flash frequency is high or it remains
off, it means that the turning signal
system goes wrong. Contact the
nearest JAC authorized after-service
center for repair.
High beam indicator lamp
When the headlamp switch switches
to the High Beam position, the high
beam lamp will come on.
Front fog lamp
When the front fog lamp is on, the
indicator lamp goes on.
Engine oil pressure alarm lamp
When the engine oil pressure drops or
the system malfunction occurs, the
engine oil pressure alarm lamp will
come on. Normally, the engine oil
pressure alarm lamp will come on
when the ignition switch turns to the
"ON" position and go out after the
engine is started.
If the alarm lamp remains on after the
engine is started or comes on during
driving, it means that the engine oil
quantity is insufficient or other malfun
-ctions occur. In such case, stop the
car
immediately for oil quantity
checking to ensure the driving safety.
If the oil level is low, add oil and
re-start the engine. If the alarm lamp
remains on after enough oil is added,
11
Rear fog lamp
When the rear fog lamp is on, the
indicator lamp goes on.
system has finished self-inspection
and is under normal working condition.
When the ABS alarm lamp remains on
or comes on during driving or goes out
when the ignition switch turns to the
ON position, it means that the ABS
system goes wrong. At this time, the
brake system works normally, but the
ABS system fails. Contact the nearest
JAC authorized after-service center
for checking.