JAC J5, Руководство пользователя

Страница: 23 / 166

Replacement instruction:
1. Remove the cover board from the
remote control front surface. Pull off
the transmitter.
2. Carefully open the transmitter cover.
Take out the old battery and place a
new one. Make sure that the battery
polarity is the same (The positive pole
must be upward)
3. Cover the transmitter cover. Make
sure that the board is firmly covered to
prevent water penetration
4. Install the transmitter into the
remote key and firmly cover the board
5. Test the function of transmitter
茵
Avoid touching the circuit board
when replacing the battery. The
static electricity from your body to
the circuit board may damage the
transmitter.
Key tooth code Battery replacement
The key tooth code is recorded in the
place as shown in the above figure. In
view of the safety, it is recommended
that you write down the key tooth
code after purchasing and put the
record in a safe place for emergency
use. In addition, if you lost your key,
you need only to provide the key tooth
code to the JAC authorized after
-service
center and the JAC
authorized after-service center will
make new key for you.
When the battery of the remote control
gets weak, you may need to press the
button several times to lock or unlock
your car. In such case, the indicator
lamp will remain off. Replace the
battery as soon as possible.
16