JAC J5, Руководство пользователя

Страница: 122 / 166

Engine compartment cleaning
and corrosion prevention
Remove leaves and foreign materials
in the water trap in time. The purpose
is to prevent water outlet from getting
blocked and foreign materials from
entering your car through the AC and
ventilation system.
The external surfaces of the engine
compartment and powertrain have
undergone rust prevention treatment
As the mixture among residual
petrol, grease and engine oil bleeding
when cleaning the engine needs to be
dealt with via an oil-water separator, it
is recommended to have the engine
cleaned in our after-service centers or
relevant qualified service providers.
The JAC authorized after-service
centers provide the JAC recomm
-ended cleaners, preservatives and
are equipped with necessary equipm
-ent .It may cause scalds, other body
injuries, accidents or firs when carrying
out some works, including check and
adding hydraulic fluids, on the engine
or in the engine compartment.
Never mix different kinds of fluids
added. Otherwise, it may cause severe
malfunctions.
○ Read carefully all details of this
chapter before repairing and
maintaining components of the
engine compartment:
○ To ensure operational safety,
pull out the ignition key before
contacting the water trap. This is
to prevent human injuries by a
working
wiper switched on
accidentally.
before leaving our factory. If you plan
to scatter salt to avoid freezing in
winter, the engine compartment and
water trap shall firstly be thoroughly
cleaned
and then undergo rust
prevention treatment, in order to
prevent rust caused by salt.
Turn off the ignition switch before
cleaning the engine. Do not direct
water flow to front headlamps.
If you have ever cleaned the engine or
its bay using a grease solvent, the
corrosion prevention layer of the
engine must have been removed. In
this case, all surfaces, recesses,
connectors and assemblies in the
engine compartment shall undergo
corrosion prevention treatment to
prevent them from getting corroded
for a long period. Such requirement
also
applies to replacement of
components with requirement of
corrosion prevention treatment.
115