JAC J5, Руководство пользователя

Страница: 17 / 166

3.clock
Time setting: (a) Switch to the
accumulated mileage display mode ;(b)
in such a mode, press and hold the
reset button until the "hour digit" and
"minute digit" flash. At this time, the
time setting can begin
； (c)When the
"hour digit" and "minute digit" flash,
press the button to set the time; (d)
When the time setting is completed,
the system will automatically quit the
set mode.
Odometer/Clock
Clock Reset button Odometer
Airbag (SRS) indicator lamp
When the ignition switch is at the ON
position or when the engine is started,
if the airbag
(SRS) indicator lamp
comes on and flashes for 6 seconds
and then goes out, it means that the
airbag (SRS) system is ready.
When the ignition switch is at the "ON"
position or when the engine is started,
if the airbag
(SRS) indicator lamp
remains off, or fails to go off after
flashing for 6 seconds or comes on
during driving, it means that the airbag
(SRS) system functions abnormally.
Contact the nearest JAC authorized
after-service center for checking.
ABS alarm lamp
When the ignition switch turns to the"
ON"position, and if the ABS alarm lamp
remains on a few seconds and then
goes out, it means that the ABS
10
Alarm lamp and indicator lamp
1.Odometer
Accumulated mileage: It means the
accumulated mileage of the drived
distance.
Trip mileage: It means a short mileage
within a trip.
The two mileage display modes can be
switched by pressing the reset button.
When in the accumulated mileage
mode, press the reset button to switch
to the trip mileage display mode. Press
and hold the reset button to reset the
displayed value to zero. Press the reset
button will return to the accumulated
mileage display mode.
2.reset button
The reset button is used to switch
odometer modes, adjust clock setting
and reset.