JAC J5, Руководство пользователя

Страница: 142 / 166

The following procedure applies to tire
change and flat tire replacement.
Before replacing flat tires, you should
shift the selector rod to the P (for
models with automatic transmission)
or R (for models with manual transmi
-ssion) position and apply the parking
brake.
To replace burst tire, stop your car on a
horizontal road far away from traffic
flow.
1. Take out spare tire and tools
Take out the spare tire and the jack
from your toolkit.
2. Block wheels
Before lifting your car via the jack, you
should block with a stop the tire
diagonal to the tire to be replaced. This
is to prevent your car from moving
when replacing tires.
3. Loosen wheel nuts
Prior to lifting your car, make sure that
the socket wrench has firmly covered
the nut. Turn your wrench smoothly
and counterclockwise to loosen wheel
nuts. Hold the end of the socket
wrench handle to obtain a max
leverage. Do not try to take off the nut.
Turn the nuts for half turn to one turn.
135