JAC J5, Руководство пользователя

Страница: 133 / 166

Check and replace wheels
○ New tires do not produce a best
adhesion, thus needing a running
-in period. For new tires, it is
necessary to carefully drive at
medium speed in an initial 500km
travel. A good running-in will help
extend tire service life.
○ Treads of new tires come
different in construction and shape
depending on their type and
manufacturer.
Check tires for damage (punctures,
cuts, cracks and swells) frequently.
Clear foreign materials in tire treads.
To avoid damage of tire and wheel hub
, you need to avoid head-on obstacles
and drive past them as slowly as
possible when encountering curbstone
or similar obstacles.
In general, it is not easy to observe tire
and wheel hub damage. Abnormal
vibration or pulling to one side
indicates that tires may get damaged.
If you cast doubt on one tire,
immediately slow down and stop your
car. Check the tire for damage (swells,
cracks, etc). If no visual damage takes
places, drive your car slowly and
carefully to the nearest JAC authorized
after-service center for an overhaul.
Description on tire with fixed
driving direction
If treads of tires correspond to some
direction (See direction arrow at tire
side surface), you should drive along
the fixed driving direction. That will
obtain the best performance in terms
of water skidding, road adhesion, low
noise and wear.
Tire service life
Tire service life normally depends on
such factors as inflated air pressure,
driving habit and wheel dynamic
balance.
126