JAC J5, Руководство пользователя

Страница: 148 / 166

Be careful not to damage bump
-ers or bottom plate when
towing and craning your car.
Never use a cable-type crane
truck to tow and crane your car.
Or, it may cause damage to the
bumpers or bottom plate.
If towing and craning your car
with its rear wheels contacting the
ground, make sure that the parking
brake is released.
Check the transmission oil level before
towing and craning your car. If the
level is too low, add more oil. If it's
impossible to add the oil, tow and
crane your car with its four wheels
suspended.
Manual transmission
If not using a towing and craning
vehicle, you need to turn the ignition
switch and the selector rod to ACC and
Neutral respectively.
If not using a towing and craning
vehicle, you should not tow and crane
your car from the tail when the ignition
key is pulled out or when the ignition
switch turns to LOCK.
141
Automatic transmission
If all of the four wheels of the towed
vehicle are on the ground, the vehicle
can be towed only from its front.
Confirm the transmission is located at
neutral gear position, place the ignition
switch at ACC and make sure the
steering wheel is not locked up. There
should be a driver operating the
steering wheel and brake in the towed
vehicle.
To avoid serious damage of the
automatic transmission, vehicle speed
should not exceed 30km/h and towing
distance should be within the range of
30km.
Before vehicle towing, check the AT
for transmission oil leakage. In the
case of transmission oil leakage, it is
necessary to apply a flatbed trailer or a
vehicle with a towing platform.