JAC J5, Руководство пользователя

Страница: 153 / 166

4. Check if the water pump belt is
missing. If not, check if it is firmly
tensioned. If the belt works normally,
check if there is coolant escaping from
the radiator and hose (if you have used
the AC system, it is normal that there
is cool water flowing out when
stopping car).
5. If the water pump belt is damaged
or there are coolant leaks, immediately
stop the engine and contact the
nearest JAC authorized after-service
center for help.
6. If you fail to find out causes for
overheating, wait until the engine
temperature returns to normal. If the
coolant level is too low, carefully open
the radiator cap. Add coolant until its
level reaches half of the marked scale.
7. Keep the engine running. Observe if
the engine gets overheated. If so,
contact the nearest JAC authorized
after-service center for help.
If the coolant level is far too low, it
indicates that the cooling system
goes wrong. Immediately contact
the nearest JAC authorized after
-service center for help.
○ Keep your hair, hands, and
clothes away from such moving
parts as fan and belt when the
engine is running to avoid body
injuries.
○ Do not deal with the fuel
injection system when the engine
is running or 30s after the engine
is off. High pressure pump,
injector, high-pressure duct are
under high pressure when the
engine just stops.
Engine overheating
If the water temperature gauge
indicates a high temperature value or if
you feel decreased engine power
output or hear "click" noise, it indicates
that the engine gets overheated. In this
case, your should take the following
measures:
1. To ensure safety, immediately drive
your car to the roadside and stop it in a
safe place.
2. Shift the selector rod to P (for
models with automatic transmission )
or Neutral (for models with manual
transmission). Apply the parking brake.
Switch off the AC system.
3. If there is engine coolant or steam
escaping from the engine cover, do not
try to open the engine cover until there
is no coolant or steam escaping. If
there is no coolant or steam escaping,
start the engine to check if the fan
works normally. If in this case the fan
fails to work, stop the engine.
146