illumina 20040482, Руководство по эксплуатации, Страница: 71 / 124

6 - Operation
Operating in Routine Operation Mode
Infinium LiHa and Infinium RoMa Operating Manual - Document # 1000000110155 v00 6 - 7
6.3.2 Enclosed Work Area
Cross
References
List of cross references to information provided in other sections:
WARNING
Unexpected, fast movements of arms and tips.
Interfering with the arm and tip movements can lead to serious injuries or
equipment damaging.
Never operate the instrument while safety panels, covers or access doors are
open or removed.
The operator will be prompted by the software when the worktable setup requires
new racks or carriers. Any further interference in the work area is strictly
prohibited.
The operator might need to open or remove the work area safety panels for
instrument setup, cleaning and maintenance purposes. For detailed procedures
refer to cross references above.
6.3.3 Switching the Instrument On
Cross
References
List of cross references to information provided in other sections:
Before switching the instrument on, check the following:
WARNING
Automatically moving parts.
If the safety panels are not in place, injuries (crushing, piercing) are possible.
Before starting the Infinium LiHa and Infinium RoMa, make sure that the safety
panel is closed.
Never operate the instrument with the panel open.
Subject Reference
Detailed maintenance procedures See chapter 7 “Preventive Maintenance and
Repairs”, 2 7-1
Subject Reference
Checks before starting a run See section 6.3.4 “Instrument Preparation and
Checks”,  6-9