illumina 20040482 Скачать руководство пользователя страница 55

Страница: 55 / 124

4 - Description of Function

Function

Infinium LiHa and Infinium RoMa Operating Manual - Document # 1000000110155 v00

4 - 9

Door Locks

How do the

Door Locks

Work?

The door locks actively lock the front safety panel during operation of the Infinium

LiHa and Infinium RoMa. This is achieved with a software command from the

application software.

Application

Software

The application software is programmed in such a way that



if the safety panel is open the process cannot be started.



the door locks can only be unlocked when the process is stopped or in pause

mode.

The figure shows the door locks in connection with the standard and closed safety

panel:

The door locks consist of a locking device (A) with an electromagnetic actuator on

each side of the worktable and a catch (B), which is mounted to the safety panel.

A switch in the locking device monitors if the safety panel is open or closed.

Fig. 4-7

Door locks

Содержание 20040482




























































































































Результаты поиска

Содержание 20040482

Отзывы:

illumina 20040482, Руководство по эксплуатации, Страница: 55 / 124

Результаты поиска

Содержание 20040482

Отзывы: