illumina 20040482, Руководство по эксплуатации, Страница: 30 / 124

3 - 2 Infinium LiHa and Infinium RoMa Operating Manual - Document # 1000000110155 v00
3 - Technical Data
Introduction
3.1.2 Product Identification and Labeling
Type Plate Details for product identification can be read from the type plate, which is located
on the back side of the instrument near the power inlet.
On the type plate (A) you find the following information:
 Identification data
–
Model
– REF: Ordering information (material number)/revision level
– Production date
– SN: Serial number
 Technical data
–
U, f: Supply voltage (Volts), frequency (Hertz)
– P: Power consumption (VA)
– Fuse: Required fuse protection (A)
 Manufacturer’s name and address
 Conformity marking
Serial Number
Label
The identification data is also printed on the serial number label (B). This label can
be viewed from the front side of the instrument. It is attached below the diluters.