2 - Safety
Operating Company
Infinium LiHa and Infinium RoMa Operating Manual - Document # 1000000110155 v00
2 - 5
–
Use appropriate protective clothing, safety goggles, mouth/nose
protection and gloves.
The handling of substances and the disposal of waste may be subject to local,
state or federal law or regulations with regard to health, environment or safety.
Strictly observe the corresponding provisions.
Caustic substances can cause burns and eye injury.
–
Always be aware of possible hazards associated with these substances.
–
Avoid exposure to caustic substances.
–
Use appropriate protective clothing, safety goggles, mouth/nose
protection and gloves.
The instrument is not explosion protected. Not for use in Ex zones.
When using flammable material take the risk of fire into consideration:
–
Avoid the formation and accumulation of flammable vapors.
–
Avoid the spillage of flammable material.
Regarding all hazards (referring to the listed hazards earlier in this section)
pay attention to the following:
–
Prior to using hazardous materials perform a risk assessment.
–
Consider specific workplace conditions, such as temperature, air
ventilation, electrostatic discharge.
–
Make sure that the risk is acceptable prior to use of the instrument.
Wrong sample results due to disturbances, such as electromagnetic fields or
supply voltage fluctuations, caused by external devices.
–
Do not place devices emitting electromagnetic fields close to the
instrument.
–
Do not connect devices that may interfere with the supply grid to the same
power line as the instrument.
For California residents only: This product can expose you to chemicals such
as lead which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov/product.
2.3 Operating Company
The operating company must ensure that the Infinium LiHa and Infinium RoMa, in
particular the safety features, function properly and that all the personnel in
contact with the instrument are adequately trained.
Responsibilities
Method and process validation.
Defining the processes in compliance with the Standard Operating
Procedures.
Ensuring that installation and operational qualifications (IQ OQs) have been
completed.
Ensuring that all personnel in contact with the Infinium LiHa and Infinium
RoMa are adequately trained.
Ensuring the availability of appropriate protective clothing and equipment.
Ensuring the maintenance and safe operation of the Infinium LiHa and
Infinium RoMa.
Requiring adherence to laboratory safety regulations and directives.