6 - 12
Infinium LiHa and Infinium RoMa Operating Manual - Document # 1000000110155 v00
6 - Operation
Operating in Routine Operation Mode
Carriers
Identification by
PosID
Always place the carriers correctly on the worktable as shown in the figure (B):
WARNING
Wrong identification of a carrier.
If carriers are not placed correctly on the worktable and if there are unfavorable
circumstances (barcode labels not within specified limit, distance of the incorrectly
placed carriers to the barcode reader still enables reading), the barcode reader
might read the wrong carrier.
When loading carriers, always slide them all the way to the stop at the lock
pin.
When carriers need to be removed, always remove them completely from the
worktable.
Never remove or place a carrier on the worktable while the PosID is reading.
6.3.4.2 Racks and Containers
If a rack is damaged, replace it immediately.
Make sure that the correct barcode is used for the rack.
Microplates
Microplates must be positioned correctly on the carrier, seating well in their holder.
Make sure that the microplate does not rest on the holder rim in a slanting
position.
Fig. 6-3
Carriers on worktable
D
D
A
B
C
C
A
Incorrect position of carriers (offset of
carriers indicated with arrows)
B
Correct position of carriers
C
Lock pin
D
PosID barcode reader