illumina 20040482 Скачать руководство пользователя страница 83

Страница: 83 / 124

7 - Preventive Maintenance and Repairs

Tools and Consumables

Infinium LiHa and Infinium RoMa Operating Manual - Document # 1000000110155 v00

7 - 1

7 Preventive Maintenance and Repairs

Purpose of This

Chapter

This chapter gives instructions on all maintenance work to be performed in order

to keep the Infinium LiHa and Infinium RoMa in good working condition.
In addition to this, adjustment and repair jobs the operator can carry out by

himself/herself are explained.

Principle

Only operate the Infinium LiHa and Infinium RoMa when it is in good working

condition. Strictly observe the maintenance instructions as set out in this manual.

To achieve specified performance and reliability of the instrument, regularly carry

out the maintenance and cleaning tasks.
In case of any problems and for inquiries contact the local service organization.

Additional

Documents

In the

Infinium LiHa and Infinium RoMa Daily/Weekly Maintenance Checklist

the maintenance work that has been carried out can be recorded to be kept in the

Infinium LiHa and Infinium RoMa Maintenance and Service Logbook

7.1 Tools and Consumables

7.1.1 Cleaning Agents

WARNING

Working with cleaning agents may be hazardous.



Always observe the safety measures given by the manufacturer.

WARNING

Fire hazard.



Do not use flammable liquids without supervision by the operator.



Take measures to prevent electrostatic discharge.

ATTENTION

Strong detergents can dissolve carrier and worktable surface coatings.



For cleaning the instrument, use alcohol or water as cleaning agents.

Содержание 20040482




























































































































Результаты поиска

Содержание 20040482

Отзывы:

illumina 20040482, Руководство по эксплуатации, Страница: 83 / 124

Результаты поиска

Содержание 20040482

Отзывы: