HYDAC International CS1000 Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 53 / 100

Analog output
HYDAC Filtersysteme GmbH en Page 51
BeWa CS1000 3247149l en.doc 2006-07-24
11.1.4 SAE A / SAE B / SAE C / SAE D (SAE A/SAE B/SAE C/SAE D)
The SAE x setting enables the value of a class to be continuously outputted via the analog output.
11.1.5 SAE + T (SAE+T)
The SAE+T signal consists of 5 measured values which are transmitted time-coded with the following
time slices:
11.1.5.1 Time-coded Signal
4,0 2,0
I (mA)
1
2 4 6
8 10
3 5 7
9
U (V)
time (ms)
4,8
19,2
High High
Low
Low
300
3000
3000
3000
3000
2,25
2,4
9,6
4,5
9,75 19,5
9,9
10,0
9,85
19,7
0,0
19,8
Ti
me
Signal Size Signal
duration per
pulse in ms
Current (I) / Voltage (U)
1 Identifier SAE A 300 High / Low
2 Measured
value
SAE A 3000
Current / voltage for measured value (see table 11.1.1)
3 Identifier SAE B 300 High / Low / High / Low
4 Measured
value
SAE B 3000
Current / voltage for measured value (see table 11.1.1)
5 Identifier SAE C 300 High / Low / High / Low / High / Low
6 Measured
value
SAE C 3000
Current / voltage for measured value (see table 11.1.1)
7 Identifier SAE D 300 High / Low / High / Low / High / Low / High / Low
8 Measured
value
SAE D 3000
Current / voltage for measured value (see table 11.1.1)
9 Identifier Temperature 300 High / Low / High / Low / High / Low / High / Low / High / Low
10 Measured
value
Temperature 3000
Current / voltage for measured value (see table 11.5.1)