For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com
Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies
Overview
Figure 1. DF-G1 Model Features
1
Output LED
2
LO/DO Switch
3
RUN/PRG/ADJ Mode Switch
4
Lever Action Fiber Clamp
5
Red Signal Level
6
Green Threshold
7
+/SET/- Rocker Button
Models
Model
Outputs
Connector*
DF-G1-NS-2M
Single NPN
2 m (6.5') cable, 4-wire
DF-G1-PS-2M
Single PNP
DF-G1-NS-Q3
Single NPN
150 mm (6") PVC pigtail, M8 Pico QD
connector, 4-pin
DF-G1-PS-Q3
Single PNP
DF-G1-NS-Q7
Single NPN
Integral M8 Pico QD connector, 4-pin
DF-G1-PS-Q7
Single PNP
* Cordset Options: A model with a QD connector requires a
mating cordset. For 9 m cable, change the suffix 2M to 9M in
the 2 m model number (example, DF-G1-NS-9M). For M12
Euro QD pigtail change the suffix 2M to Q5 in the 2 m model
number (example, DF-G1-NS-Q5).
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death. This
product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor
failure or malfunction can cause either an energized or de-energized sensor output condition.
Hookups
NPN Models
PNP Models
Key
2
3
4
1
1 = Brown
2 = White
3 = Blue
4 = Black
For cable options, see
http://www.bannerengineering.com
DF-G1 - Expert Fiber Amplifier Install Sheet
P/N 161275 Rev. A
1/6/2012
0 161275
2
