HYDAC International CS1000 Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 100

background image

General Safety Precautions

HYDAC Filtersysteme GmbH

en

Page 9

BeWa CS1000 3247149l en.doc

2006-01-18

1.2.1 Basic Symbols

This symbol designates safety instructions whose non-observance may pose a
hazard to individuals.

This symbol designates safety instructions whose non-observance may result in the
injury of individuals by electric shock.

This symbol provides important instructions and tips for the proper handling and
operation of the CS.
Non-adherence to these instructions may result in damage to the CS or in damage
to its immediate surroundings.

This symbol is followed by user tips and particularly useful information. This
information helps you to optimally utilize all the features offered by your CS.

1.3 Proper/Designated

Use

The Contamination Sensor (CS) was developed for the continuous monitoring of particulate
contamination in hydraulic systems.

Analyzing the size and quantity of contamination enables quality standards to be verified and
documented and the requisite optimization measures to be implemented.

Any other use shall be deemed to be improper and not in keeping with the product's
designated use.

Proper or designated use of the CTU extends to the following:

•

The Contamination Sensor CS 1000 Series is a stationary measurement unit for the
continuous monitoring of particulate contamination in hydraulic and lubrication systems.

•

Maintaining adherence to all the instructions contained herein.

1.4 Improper

Use

•

Any use deviating from the proper/designated use described above is prohibited.

•

Improper use may result in hazard to life and limb.

•

Example of improper use:

improper connection of the ContaminationSensor pressure and return flow lines.

1.5 Safety

Devices

•

Prior to starting up the product each time, make sure that all the safety devices are
properly fitted to the hydraulic system in which the product is to be used and are in proper
working order.

•

Safety devices may not be removed until the product has been shut down and secured
against being restarted (e.g. warning sign or padlock on the main switch).

•

When the product is supplied in partial consignments, the safety devices are to be
applied by the operator as specified by law/pertinent regulations.

1.6 Informal safety precautions

•

Make sure to always keep the operating instructions in the vicinity of the product.

«
...
9
10
11
12
13
...
»

Содержание CS1000 Series





































































































Отзывы:

Нет отзывов

Похожие инструкции для CS1000 Series

Бренд: Jetmaster Страницы: 17

Бренд: Qube Страницы: 19

Бренд: IBM Страницы: 12

Бренд: Canon Страницы: 14

IMAGE STABILIZER EF70-200MM F/4L IS USM

Бренд: Canon Страницы: 13

TIMER REMOTE CONTROLLER TC-80N3

Бренд: Canon Страницы: 3

TIMER REMOTE CONTROLLER TC-80N3

Бренд: Canon Страницы: 2

EF-S55-250mm f/4-5.6 IS II

Бренд: Canon Страницы: 7

I-Class Mark II

Бренд: Datamax Страницы: 12

Бренд: Nauticam Страницы: 2

Бренд: IHP Страницы: 8

Бренд: Wagan Страницы: 12

Бренд: Naish Страницы: 23

FIX&GO automatic

Бренд: Alfa Romeo Страницы: 40

MAGNUM RT Series

Бренд: Raptor Series Страницы: 6

Vantage 12 Series

Бренд: Ecco Страницы: 5

Бренд: Boxee Страницы: 18

Бренд: hepco & becker Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды