Removing,
Disposal
HYDAC Filtersysteme GmbH
en
Page 85
BeWa CS1000 3247149l en.doc
2006-06-14
15 Removing the CS from the Hydraulic System /
Decommissioning
1.
Remove electric plug from CS.
2.
Remove the hydraulic measurement line from the hydraulic system first, then from the
INLET port of the CS.
3.
Remove the hydraulic return-flow line from the OUTLET port of the CS.
4.
The CS can now be removed.
15.1 Disposal / Recycling
The packing material is to be disposed of as specified by law or national regulations.
When decommissioning and/or disposing of the CS, adherence is to be maintained to local
guidelines and regulations pertaining to occupational safety and environmental protection.
This applies in particular to the oil in the unit, components covered with oil and electronic
components.
After disassembling the unit and separating the various materials, they can be reused or
disposed of properly in accordance with local regulations.
16 Spare parts and Accessories
Description
Qty. Part no.
Connector with 2 m cable, screened, 8-pole, M12x1
1
3281220
Connector with 5 m cable, screened, 8-pole, M12x1
1
3281239
Extension cable 5 m, socket 8-pole, M12x1 / plug 8-pole, M12x1
1
3281240
Connector 8-pole, M12x1, screened, with screw clamp
1
3281243
CD with - PC-Software package CoCoS 1000 and
- Operation and Maintenance Instruction
1
3251484
Contamination Sensor Interface CSI-D-5
1
3249563
O-ring for flange connection model (4,8x1,78 - 80 Shore FPM)
1
6003048
Содержание CS1000 Series
Страница 97: ...Notizen Note Note ...
Страница 98: ...Notizen Note Note ...
Страница 99: ...Notizen Note Note ...